[فارسی]
You are Here HomeFaculty Members
 Faculty Members
    ImgTeacher
    Name : Babak Abazadeh

    Department : Mechanical Engineering
    Organization Chart : Faculty Member
    Academic Position : Assistant Professor
    Teaching courses : ...
    Start service :
    Degree : نامشخص
    Section : NON
    Educational Background :
    BirthDay :
    Extension :
    Phone :
    Fax :
    Mobile :
    Email :
    Description :

    Modified Date :
     

    EDUCATION

    Ph.D. Applied Mechanics (solid mechanics) Division, Mechanical Engineering Department, University of Tabriz, August, 2007- Feb 2012, Tabriz, Iran (Thesis title: The combined effect of interference fit and bolt clamping on the fatigue life of double shear lap joints, supervised by Chakherlou TN).

    M.Sc. Applied Mechanics (solid mechanics) Division, Mechanical Engineering Department, University of Tabriz, August, 2006, Tabriz, Iran.

    B.Sc. Applied Mechanics (solid mechanics) Division, Mechanical Engineering Department, University of Tabriz, August, 2003, Tabriz, Iran

    EXPERIENCES AND ADMINISTRATION WORKS

    - November 2004-Febraury, 2009 Vice-Researcher of Agricultural engines- defect analyzer, Q.C. Department, Motorsazan, Tabriz, Iran.

    - B.Sc. project: Numerical stress and strain analysis of a four cylinder engine crank shaft.

    - Design of an electromotor shaft produced by MotoGen. Co.

    - M.Sc. thesis: An investigation about bolt clamping effect on crack propagation from a fastener hole under static load, supervised by Chakherlou TN. (experimental and numerical analysis)

    - Member of Organizing Committee, the 8th Fluid Mechanics Conference, Tabriz University, Tabriz, Iran

    - February 2011- September 2011, Guest Researcher, (fatigue behavior of Glare plates) Structural Integrity Department, Faculty of Aerospace Engineering, Technical University of Delft, Delft, Netherlands

    - February 2012- until now, Head of mechanical engineering department, university of Bonab.

    EMPLOYMENT HISTORY

    November 2004-Febraury, 2009, Q.C. Engineer (defect analyzer), Motorsazan, Iran Tractor Manufacturing Company (ITMCO), Tabriz, Iran

    February 2012- till now, Assistant Professor, university of Bonab, Bonab, Iran.

    TEACHING EXPERIENCES

    -          Mechanical engineering design 1 & 2.

    -          Mechanics of materials.

    -          Finite element methods (Linear).

    -          Fracture mechanics.

    -          Technical English.

    -          Composite materials.

    -          Machine dynamics and vibration Lab.

    -         

     

    Interests

    Fatigue (fatigue life enhancement techniques, Multiaxial fatigue criteria, fatigue crack initiation and growth, fretting fatigue), Fracture mechanics, FEM, Stress and Strain analysis, Composites.

     

    PUBLICATIONS

     

    ISI Journal Publications

    1. TN Chakherlou, B Abazadeh, J Vogwell, The effect of bolt clamping force on the fracture strength and the stress intensity factor of a plate containing a fastener hole with edge cracks, Engineering Failure Analysis 16 (1), 242-253
    2. TN Chakherlou, M Mirzajanzadeh, B Abazadeh, K Saeedi, An investigation about interference fit effect on improving fatigue life of a holed single plate in joints, European Journal of Mechanics-A/Solids 29 (4), 675-682
    3. TN Chakherlou, B Abazadeh, Estimation of fatigue life for plates including pre-treated fastener holes using different multiaxial fatigue criteria, International Journal of Fatigue 33 (3), 343-353
    4. TN Chakherlou, M Mirzajanzadeh, J Vogwell, B Abazadeh, Investigation of the fatigue life and crack growth in torque tightened bolted joints, Aerospace Science and Technology 15 (4), 304-313
    5. TN Chakherlou, MJ Razavi, AB Aghdam, B Abazadeh, An experimental investigation of the bolt clamping force and friction effect on the fatigue behaviour of aluminum alloy 2024-T3 double shear lap joint, Materials & Design, Volume 32, Issues 8–9, September 2011, Pages 4641-4649.
    6. TN Chakherlou, B Abazadeh, Experimental and numerical investigations about the combined effect of interference fit and bolt clamping on the fatigue behavior of Al 2024-T3 double shear lap joints, Materials & Design, Volume 33, January 2012, Pages 425-435.
    7. TN Chakherlou, HN Maleki, B Abazadeh, AB Aghdam, Investigating bolt clamping force effect on the mixed mode fracture strength and stress intensity factor for an edge crack in PMMA specimens, Materials Science and Engineering: A, Volume 533, 30 January 2012, Pages 71-81
    8. TN Chakherlou, B Abazadeh, Investigating clamping force variations in Al2024-T3 interference fitted bolted joints under static and cyclic loading, Materials & Design 37, 128-136
    9. B Abazadeh, TN Chakherlou, GH Farrahi, RC Alderliesten, Fatigue life estimation of bolt clamped and interference fitted-bolt clamped double shear lap joints using multiaxial fatigue criteria, Materials & Design, Volume 43, January 2013, Pages 327-336.
    10. TN Chakherlou, HN Maleki, AB Aghdam, B Abazadeh, Effect of bolt clamping force on the fracture strength of mixed mode fracture in an edge crack with different sizes: Experimental and numerical investigations, Materials & Design, Volume 45, March 2013, Pages 430-439.
    11. TN Chakherlou, MJ Razavi, B Abazadeh, Finite element investigations of bolt clamping force and friction coefficient effect on the fatigue behavior of aluminum alloy 2024-T3 in double shear lap joint, Eng Fail Anal (2012),http://dx.doi.org/10.1016/j.engfailanal.2012.11.004.
    12. B Abazadeh, T.N. Chakherlou, René C. Alderliesten, Effect of interference fitting and/or bolt clamping on the fatigue behavior of Al alloy 2024-T3 double shear lap joints in different cyclic load ranges, International Journal of Mechanical Sciences, Volume 72, July 2013, Pages 2-12

    Conferences

    1. T.N. Chakherlou, B. Abazadeh, Bolt clamping force variations under static tensile load in a cracked single plate, ISME2008, 16thinternational conference of mechanical engineering, Kerman, Iran (in Farsi).
    2. T.N. Chakherlou, B. Abazadeh, A numerical investigation about the effect of tightening torque on the affecting parameters of fretting fatigue, ISME2010, 18th international conference of mechanical engineering, Tehran, Iran (in Farsi).
    3. T.N. Chakherlou, B. Abazadeh, H.N. Maleki, Bolt clamping force effect on the strain energy release rate in a cracked single plate, ISME2011, 19th international conference of mechanical engineering, Birjand, Iran (in Farsi).
    4. T.N. Chakherlou, B. Abazadeh, K. Shiveh, A numerical investigation about the effect of interference fit on the crack growth rate, AERO2010, 9th national aerospace engineering conference, Tehran, Iran (in Farsi).
    5. Babak Abazadeh, Hadi Rezghi Maleki, Investigating the fatigue crack initiation location in interference fitted and/or bolt clamped Al 2024-T3 double shear lap joints, ICMAE 2012 (International Conference on Mechanical and Aerospace Engineering), Malaysia, Kuala Lumpur, August 28-29, 2012.
    6. Hadi Rezghi Maleki, Babak Abazadeh, Fretting Fatigue Behavior of Bolted Single Lap Joints of Aluminum Alloys, ICMAE 2012 (International Conference on Mechanical and Aerospace Engineering), Malaysia, Kuala Lumpur, August 28-29, 2012.

     

     

    کنفرانسها:

    1. بابک عبازاده، هادی ناصری ملکی، تخمین عمر ایجاد و گسترش ترک خستگی در اتصالات دو لبه برشی توسط معیار خستگی چند محوری SWT و رابطه ناسگرو، کنفرانس سراسری مهندسی مکانیک NCMEI 2014 ، صفاشهر، شیراز، ایران، 8 اسفند 1392
    2. بابک عبازاده، مصطفی ابوالفتحی، مقایسه رفتار مکانیکی قطعات فلزی چند لایه دارای اتصال چسبی با قطعه تک لایه، کنفرانس سراسری مهندسی مکانیک NCMEI 2014 ، صفاشهر، شیراز، ایران، 8 اسفند 1392
    3. بابک عبازاده، تخمین عمر ایجاد و گسترش ترک خستگی در اتصالات دارای پیش بار توام با تداخل توسط معیارهای SWT وNASGRO ، بیست و دومین کنفرانس سالانه بین المللی مهندسی مکانیک ISME2014 ، دانشگاه شهید چمران اهواز، اهواز، ایران، 2 تا 4 اردیبهشت 1393
    4. بابک عبازاده، هادی ناصری ملکی، بررسی عددی تاثیر گشتاور مونتاژ اتصال پیچ و مهره بر پارامترهای موثر در خستگی سایشی در ورق ساده سوراخ دار، کنفرانس بین المللی مهندسی مکانیک و فن آوری های پیشرفته ICMEAT 2012 ، دانشگاه آزاد واحد شهر مجلسی، اصفهان، ایران، 19-21 مهر 1391
    5. بابک عبازاده، هادی ناصری ملکی، بررسی رفتار خستگی اتصال تک لبه برشی صفحات آلومینیومی دارای نیروی پیش بار، کنفرانس بین المللی مهندسی مکانیک و فن آوری های پیشرفته ICMEAT 2012 ، دانشگاه آزاد واحد شهر مجلسی، اصفهان، ایران، 19-21 مهر 1391
    6. تاج بخش نوید چاخرلو، هادی ناصری ملکی، بابک عبازاده، بررسی تجربی و تئوری تاثیر نیروی پیش بار و طول ترک بر مقاومت باقیمانده در حالت مود مرکب شکست، بیست و یکمین کنفرانس سالانه بین المللی مهندسی مکانیک ISME2013 ، دانشگاه صنعتی خواجه نصیرالدین طوسی، تهران، ایران، 17 تا 19 اردیبهشت 1392
    7. تاج بخش نوید چاخرلو، هادی ناصری ملکی، بابک عبازاده، بررسی تجربی و تئوری تاثیر نیروی پیش بار اتصال پیچ و مهره بر مقدار فاکتور شدت تنش ود ترکیبی درانتهای ترک موجود در لبه سوراخ، دوازدهمین کنفرانس انجمن هوافضای ایرانAERO2013 ، دانشگاه صنعتی امیرکبیر، تهران، ایران، 1 تا 3 اسفند 1391.

     

     

    Language abilities

    English: reading (fluent), writing and speaking: very good

    Turkish (Azeri): mother tongue

    Farsi: fluent

    Computer (software) skills

    Utility: Microsoft Office (Word, Excel, PowerPoint).

    Programming: Fortran, Pascal.

    Design: Auto Cad, Mechanical Desktop, Solid Works.

    Analysis: Ansys, Matlab.

    References:

    1. T.N. Chakherlou, Professor, University of Tabriz, Tabriz, Iran (tnavid@tabrizu.ac.ir).
    2. G.H. Farrahi, Professor, Sharif University of Technology, Tehran, Iran (farrahi@sharif.edu)
    3. Mojtaba Sadighi, Associate Professor, Amirkabir University of Technology, Tehran, Iran (mojtaba@aut.ac.ir)
    4. René Alderliesten, Assistant Professor, Faculty of Aerospace Engineering, Technical University of Delft, Delft, Netherlands (R.C.Alderliesten@tudelft.nl)